High-heat underlayment
The deck is covered in underlayment made for metal as a second layer of protection.
Metal Roofing
Metal Roof Installation Whippany, NJ
A Whippany roofer can help you choose between standing seam, ribbed panels and metal shingles and install the full system, with high-temperature underlayment, matched trim and closures at every edge. One call to (862) 693-4362 reaches a nearby roofer who installs metal roofs.
Before anything else, a metal roof starts with picking how the panels attach. Ribbed and corrugated panels fasten through the face with washered screws, which keeps installation simple but leaves fasteners exposed to the weather. Standing seam panels hide their clips under raised seams, so nothing pierces the flat of the panel and the metal can expand and contract freely.
Next comes the metal itself and the paint on it. Galvanized and Galvalume coated steel cover most homes, aluminum resists corrosion near salt air, and copper and zinc are long-lived specialty metals. PVDF finishes resist fading better than SMP finishes, and gauge, where a lower number means thicker metal, affects dent resistance.
What goes under the metal is easy to overlook and important to get right. A solid deck covered with high-temperature underlayment is the usual base, plus ice and water shield at eaves and valleys where needed. Outbuildings may use purlins, but a home usually gets full decking.
Many metal roof installation calls in Whippany also turn up a need for standing seam metal roof or metal roof replacement.
Need metal roof installation in Whippany? Call (862) 693-4362 to reach a nearby roofing contractor.
Call nowThe process
Installing a metal roof
Metal roofs are built to precise measurements, and the details are where they succeed or fail.
Select materials
Panel profile, gauge, paint system and color are settled, and the roof is measured so panels can be cut to length. Many panels are made to the exact length of each slope.
Get the base ready
The deck is stripped, repaired and checked for flatness, since metal panels show every dip. An even deck reduces waviness in the panels.
Dry in the roof
The deck is dried in with an underlayment rated for the heat that builds under metal. Some systems add a slip sheet under standing seam so panels move freely.
Edge flashing
The eaves and valleys get their flashing first so water flows from panel to trim. The order of trim matters because every piece has to lap water downhill.
Fasten the metal
Panels are set square to the eave and fastened with clips or washered screws in the spots the panel maker specifies. Metal filings are swept off right away so they do not rust stain the finish.
Flash the penetrations
Closures, ridge cap, wall flashing and pipe boots complete the roof. On roofs that hold snow, snow guards keep it from sliding off in a sheet.
What is included
Parts of a metal roof system
Custom flashing
Eave, rake, ridge, valley and wall trim in the same finish so the roof sheds water at every edge.
Penetration boots
Pipe boots made for metal and snow guards over entries finish the job to protect people and gutters below.
System choice
Standing seam, ribbed panels, metal shingles or stone coated steel and the look you want.
Closures
Closures fill the gaps under the trim so wind-driven rain stays out.
Related service
Metal Roofing Contractor Whippany, NJ
Choosing a metal roofing contractor means finding someone who installs metal regularly, not occasionally. Ask which panel systems they install most, how they handle trim and closures and whether they bend flashing on site.
For Whippany homeowners, the right metal roofing contractor will show how each system handles your roof shape. Driving past a couple of their finished metal roofs tells you a lot about their detail work.
Related service
Stone Coated Steel Roof Whippany, NJ
Stone coated steel roofing looks like traditional roofing but is steel underneath a granular surface. It is lighter than tile, resists wind and hail well, and the granules soften the sound of rain.
Stone coated steel is usually installed over battens, which create an air space under the panels. For Whippany homes that want a tile or shake look without the weight, it is a strong option.
Related service
Metal Shingle Roof Whippany, NJ
Metal shingles are individual interlocking panels shaped like traditional roofing units. Hidden fasteners and small units make them a good fit for roofs with dormers and valleys.
For Whippany homeowners who want metal without the look of panels, metal shingles are a common choice. Each shingle line has its own starter, trim and fastening pattern.
Local help
Metal Roof Installation Near Me
In Whippany, homeowners choose metal for its long life, wind resistance and the way it sheds snow. From Whippany out to neighboring towns such as Cedar Knolls, Parsippany, Morris Plains and Florham Park, shingle roofs are being replaced with standing seam on many houses, and ribbed panels remain common on outbuildings, so it pays to compare systems before choosing.
Need metal roof installation around Whippany? Call (862) 693-4362 for a Whippany roofer who serves the towns around it too.
What the local climate does to a roof
Cold winters bring snow, ice and a long stretch of freezing nights. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, which is how ice dams form and back water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. That is why roof repair in Whippany is busiest after a hard winter and before the next one.
Why call
Why act early
Smaller repairs
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Familiar with local homes
Roofers in Whippany know the roof types and weather wear common in local homes.
Know what happens next
Ask your questions before you agree to anything.
Metal Roof Installation FAQ
Should I choose standing seam or exposed fastener metal roofing?
It comes down to whether the screws are visible. Exposed fastener panels are screwed through the flat or rib, and standing seam uses concealed clips with raised seams. For a house, standing seam is usually worth it; for a shed, exposed fastener often makes sense.
What gauge of metal roofing should I use?
Thickness is measured in gauge, and 24 is thicker than 26 or 29. Most homes use 24 or 26 gauge steel, while 29 gauge is common on outbuildings. Ask the roofer which gauge suits your roof and local weather.
What is the lifespan of a metal roof?
Metal roofs often last two or three times as long as asphalt shingles. Concealed fastener systems usually outlast exposed fastener roofs, which need periodic screw replacement. Salt air, scratches and poor installation shorten that life.
Is a metal roof more likely to be struck by lightning?
Lightning is drawn by height and location, not by roofing material. Strikes depend on height, terrain and nearby objects, and a metal roof is no more likely to be hit than any other roof. Metal is also noncombustible, which helps if a strike does occur.
Is a metal roof louder in the rain?
On a house with decking and attic insulation, a metal roof is usually only slightly louder than shingles. The loud drumming people remember comes from metal over open purlins on barns and porches. Stone coated steel is quieter still because of its granular surface.
More questions? Call (862) 693-4362
Related services
Standing Seam Metal Roof
Standing seam metal roofs with concealed clips, raised seams and no exposed screws in the panels, built to let the metal move without leaking.
Learn moreMetal Roof Replacement
Replacing a rusted or worn-out metal roof, or swapping an old shingle roof for new metal, so the new roof starts on a sound base.
Learn moreRoof Installation
New roof installation done in the right order with the right details, whether it is asphalt shingles, metal or another material.
Learn moreCommercial Metal Roofing
Metal roof systems for commercial buildings, including new installs, replacements and leak repairs, planned around the building and its operations.
Learn more
Looking for something else?
See all roofing servicesTalk to a Whippany roofer about metal roof installation
Call (862) 693-4362 for a local roofer in Whippany and nearby towns.